Now 6 wks old - Collie Puppy Pics

[Spiritwind]

Thanks everyone... they are getting pretty big (and messy!!) they do have a good bit of outside time now, and I try to keep them outside until 11:30pm or so (they are still out right now, getting ready to bring them in)... but if I do that, for the most part they seem to sleep thru most of the night, till around 6am or so anyway... pretty good for little babies... and don't make to much of a mess thru the night, if I get them outside as soon as they wake up in the morning..... Tho when they come in at night and are put in their pen for the night they scream for a while, because they want out to badly LOL I swear one night last week they screamed (not barking, not whinning, this was SCREAMING) for an hour LOL all 5 lol..

My personal favorite is the smooth tri boy (Bryce) followed closely by Ronan, but all are so pretty... and rotten little monsters! Really showing their personalities.... Bryce is gonna be a handful, he is bad! and very up and in your face kinda pup... loves toys and LOVES to tug.... lol isn't afraid of anything..... Rough boy (Cody) is a very dominat, fiesty puppy, he USED to be the mellow on.... Ronan is the reserved, a little softer pup in the litter, hopefully he'll grow out of that.... the female (Nexus) was a lot like Bryce... loves toys, loves to play, isn't afraid of anything... the other smooth blue (Finn) is a very curious, noisey, likes to explore pup.....

[shais_mom]

oh my gosh!
how stinking CUTE!!

[jennielynn1970]

The pups are just so gorgeous!! I just want to hug and cuddle them all!!!


What do you mean when you say that Amy "doesn't use her ears" when she shows? I have no idea about showing, lol, so I was just wondering what that meant.

[HoochsMommiee]

they are all adoreable but Bryce is a handsome lil man

[boomersooner]

Love 'em to pieces!!!!!! You need that guy from that boxer video which someone posted to come and sing them to sleep every night.....

[Spiritwind]

The pups are just so gorgeous!! I just want to hug and cuddle them all!!!


What do you mean when you say that Amy "doesn't use her ears" when she shows? I have no idea about showing, lol, so I was just wondering what that meant.

Amy hates to show.. what I mean about not using her ears.. In the pictures I posted of her, you can see her ears are up and forward, she is alert and it shows great expression, which is VERY important for Collies. That is how her ears should be when she is in the ring showing.... however, Amy I guess just hates to show. The whole time she is in the ring her ears are thrown back against her head and she will NOT put them up... nothing will get them up... not food, noise, anyway.... its so frustrating... LOL

[4 Dog Mother]

What sweet cute little pups! It has been so nice to watch them grow. I always thought I wanted a "Lassie" type dog but now just have three medium haired dogs tells me I better be thinking of a smooth coated one if I ever get one. All that brushing!!!! Amy is so beautiful - it is too bad she doesn't enjoy doing it. I absolutely love the smooth blue boys!!

[Spiritwind]

I posted this on another forum I go to, where the people asked how I taped/braced the puppies ears... so thought I'd post it here too...

Here are step by step pictures of taping ears... sorry about the poor quality of pictures, its hard to tape ears, hold the puppy and take pictures at the sametime... but it should basicly show how I tape ears..

First.. you need your supplies... here is what I use.


Elastikon tape, starter fluid, rubbing alcohol, cotton cleaning pads to clean the ears.. and after I get the ears taped up, I usually stray something on the ears, to try to keep pups from pulling on eachothers braces..

Step 1:

unroll the amount of tape you will need.. this depends on the size of the puppy and the age of the puppy. If you are just bracing ears on a young puppy for the first time (6-7-8 wks old), you want the ears to be fairly close together on top of the head... otherwise you may end up with wide set ears.



Step 2:

Cut the tape in half.. if you use elastikon tape, I usually cut along the line that runs down the middle of the tape (for the 3 inch x 2.5 yards roll)



Step 3:

After you have cut the tape in half, you take one half of the tape and cute out the brace that will go from ear to ear. Then you take the other half of the tape and cut it in 2 long strips which will eventually be used to tape the tips of the ears down.



Step 4:

After you have cut the ear brace and the strips to later tape down the ear tips you can spray the back, sticky side of the tape with the engine starter fluid.. and let it sit for a few minutes. I would highly recommend spraying the engine starter fluid outside. After you sprayed the braces, you can go back to the puppy and clean out his ears really good with the rubbing alcohol. Make sure you get all the oil off the ears and then let the ears dry really good before you start the taping process...

Taping...

Step 1:

By now the tape should be very sticky and the engine starter fluid should be dry. You put one end of the ear brace in the first ear..... as shown in the picture below.. I personally like to stick the tape low in the ear, and toward the inside edge of the ear.. which you can see from the pictures..



Step 2:

Then you put the other sticky side of the brace in the other ear... so it looks like this.. here are 3 pictures to show you what it should look like after bracing both ears together...







Step 3:

Now this is where those other 2 strips of tape you cut into play.... you take one strip of tape and place in long ways, up and down the ear.. starting with one end right on top of the brace you just put in the ear.... and placing it all the way up the ear.. so the end of the tape sticks out above the tip of the ear... as seen below in the picture..

[Spiritwind]

Step4:

Then you take the tape that is sticking out past the tip of the ear and roll it so that its rolled with the sticky side of the tape facing out... so it looks like this:



Then you fold the ear over, so its folded over in half and stick the tape on the tip of the ear, to the tape on the brace at the base of the ear.. this will hold the tip over at a correct place, and if you keep on top of it, once the ear is set and you do not have to brace/tape anymore, it will give you a nice curve/tip to the ear..

Step 5:

Then you repeat step 4, with the other ear...



Once finished, you should have this.....



I USED to use Skinbond to hold the tape in better, which meant I didn't have to use starter fluid to make the tape sticky, but apparently they have stopped making skin bond so until I find a similar product that works as well...this is how I gotta do it... so far I haven't had much luck....