Sadly, that isn't going to happen,, because it takes more than a sound bite to actually fix social problems. Nothing proposed by either side is going to fix Chicago, or any other urban issues, for that matter.
Printable View
That's how it's starting to look around here. The Chicago Police Department announced that they have already spent two thirds of their overtime budget for the entire year - just since January. Warm weather and festival season isn't even here yet and that's when things in Chicago tend to go all wonky. Nothing proposed by either side is going to fix Chicago until Chicago decides it doesn't want to be the dysfunctional, murder capital of America, city it has become. Apparently a teenage honor student and a 6 month old baby aren't enough collateral damage. They just keep shooting.
Is this too awful for this site? :) A neat, but very expensive thing to have happen. It is pretty cool, as long as it does not happen again.
Attachment 56347
I call that a pretty tight group. LOL Could not do it again if I tried.
Oh the humanity!!!!
How could you do that to an innocent block of foam and an equally innocent arrow!
I know, right? ;) I even used a compound bow with a mechanical release. Some people call me a 'cheater' because of it. lol
So much blood, you might be banned! ;)
Hehe, that's definitely some kind of accomplishment! :p I am lucky if I get a bullseye once in any round! If you use a Compound Bow and you still suck does that count as cheating :D
Saw a news report on a 'printable, plastic' gun that was successfully fired.
It was made on a used 8,000 dollar 3-D printer, some plans off the internets, about 40 dollars worth of material and about 6-8 hours of time.
The only metal part was a nail, used as a firing pin.
:eek:
Ha. Nope. :)
When I am gearing up for archery season (opens in late September, I start seriously shooting in late May) I shoot a dozen every day. I would shoot more, but my hunting bow draws at 68lbs so I don't want to wear my arm out too much. lol For me, the keys to accurate archery are 3 key points.
- Soft hands with your bow arm. Do not have too tight a grip. When you shoot the bow should naturally drop forward.
- Move your waist when making vertical aiming corrections, rather than moving your bow arm. You want your arms and head to be the same each time you shoot. This is especially true for tree stand type shooting. Being higher that your target changes the range you need to aim at. I need to get a range finder that takes angle into account.
- If you don't use one now, get a 'kisser button' on your string. That way you know that your form is correct each time you draw. A 'kisser' is a little piece on the string that you bring to the corner of your mouth when drawn and aiming.
Good luck!
The people who developed it will put a chunk of steel in it to trigger airport alarms. Right now they are made of lego plastic - they're good for about 2 uses and they break. At the moment, 3D printers can't print big items. This was made in Austin, Texas. Somehow that does not surprise me.
It's made by Defense Distributors, a non-profit. http://news.nationalpost.com/2013/05...united-states/
Sad thing is this process can be used to build new ears, noses etc for people who lose them due to accidents or illness. There are good and bad uses for everything.
I know, RICHARD. One can only hope that most people who might use this type of printer can't read the blueprints...:(
These printers are just more proof that gun control is a farce. You'd have an easier time nailing jello to a wall. Criminals are going to get weapons. Why disarm the populace and make it easier for them?
BTW, you don't need to be able to read blueprints to use these printers, it's as easy as downloading a file and hitting print.
Oh ok, the head of DD was saying that he put the "blueprints" out there, but he could have been speaking figuratively. And yes, after that interview there was much discussion about gun laws etc.
They could always track who has those 3D printers - I mean, I think most folks would want the warranty on them! Even if they were sold or given to someone else, mandatory printer registration would give a bit of a trail to follow if necessary.
Why trace an innocuous object like a printer? Create another black market? Someone with a mill, a lathe and a little skill could make guns in their home as it is if they were determined to.
It's not the tool, it's the sick individual behind the trigger you have to worry about.
We keep non-violent offenders in jail for comparatively heavy sentences for possession and possession with intent, but people who get jailed for violent crimes serve light sentences.
There's a whole bunch of things wrong with society, the availability of firearms of whatever sort isn't the problem. Banning firearms to reduce violent crimes is like putting a bandaid on a severed limb, stepping back, posing for the cameras and saying "there, all better, we fixed the problem!"
Does anyone still make zipguns? Homemade guns! I saw one made from a car antenna and rubber bands, the other made from billet steel- both were ingenious designs and the car antenna model was easy to make.
The steel gun was made from one piece of steel by a guy that worked in a machine shop and unless you knew what you were looking at, you'd never realize it was a gun.
---------------
Now that there is a 'plastic gun' you have to look at all the problems it brings.
Just like a Xerox machine, there will be ways to track who buys it - either through sales/repair records.
Just like the sale of the meds that make meth, you probably will have to show some kind of ID to buy materials to make a gun?
You'll have to register the down loads of the program and how will they be tracked? The same way pirated music is tracked and those laws enforced?
Then you have to look at the viability of making a gun that probably won't last more than a few shots, has to be reloaded after each shot and may blow up in your face.
Although a disposable plastic gun makes certain crimes easier, I would not want to get into a shootout with one.
Something about watching Wile E. Coyote having a gun blow up in face that makes me hesitate.:o;)
Lost in all the media sensationalism.....
http://www.latimes.com/news/nation/n...,3022693.story
Gun crime has plunged in the United States since its peak in the middle of the 1990s, including gun killings, assaults, robberies and other crimes, two new studies of government data show.
I've read about the plastic gun. I heard on the news that they're using a similar type of copier technology to develop tissue for burn patients and children born with malformations of their ears. But my question is this: if the gun is plastic, will it be able to pass through a metal detector without being picked up? Would the manufacturer have to "tag" it somehow?
The "manufacturer" would be anyone with a 3-d printer, and basic computer skills. The ammo, however, would still show up on a metal detector. Without ammo, the firearm is useless. (Unless of course you have some of the experimental rounds that the Army was using in one test variant of the M-16, but the bullets were still metal, even though the casings and primer were plastic)
Any USA citizen can manufacture a firearm legally, as long as it isnt for sale, without a serial number or "tag". This is true without using a 3D printer. I could make an AK-47 out of a shovel and it would be completely legal. No 3D printer needed.
Apparently you have run out of your "little blue pills" again! Need to sublimate! Make sure everyone knows how...:eek::eek:
And ...as you will surely call me a troll or whatever...please show me the "rules" about how often one must post to be considered a legitimate poster? I see some folks who haven't posted in AGES and I missed where you bullied them for it???
Anyone who can hit "print" on a PC and happens to have access to a 3-D printer. I can picture it now... a few days of someone staying at work late and bam, there are more guns on the streets.
In Maryland they passed a law requiring new gun owners to submit digital fingerprints to the state police. I heard on the news that Beretta and the NRA plan to challenge the law in court after it goes into effect October 1. I don't see the problem. They want their products to wind up in the hands of responsible gun owners, and responsible gun owners will get fingerprinted. Got a problem with that? Exhibit A: Hadiya Pendleton, who won't get to go to college. Exhibit B: Jonylah Watkins, who will never get to take her first steps.
Want to control guns?
How about let's start enforcing existing laws.....
Like this:
http://espn.go.com/new-york/nfl/stor...eapons-charges
If it wasn't an NFL player, they'd still be sitting in jail waiting for their hearing.
DUI, accessory to DUI, pot (which I REALLY don't care about) and guns in the car, and they're back out on the street.
Enforce the damned laws. I'm willing to bet that if the laws as they stand were firmly enforced, people would be railing about how draconian they are. Controlling objects accomplishes nothing if society can't control people.
This Indiana case is a prime example of a person who should not be allowed to keep guns. After his arrest he was diagnosed
with a mental disorder & he now wants his guns back, all 48 of them. (His guns were seized after he was arrested)
http://www.theindychannel.com/news/l...-police-seized
I wonder what Indiana laws are regarding mental health issues ... and whether that diagnosis could be used to keep him from getting the guns back ... Mental health is such a hot-button topic, and so tricky to define and enforce ...